Installation
Use this guide to prepare your environment and complete the initial setup for Sensoware.
Requirements
Before installation, make sure you have:
- A valid Sensoware account
- Access to the dashboard or setup portal
- Your supported device or gateway
- Power and network access for the device
- Any required activation details from your administrator
Installation Steps
Follow the installation flow below:
- Unbox and inspect the device
- Connect the device to power
- Place the device in the recommended location
- Connect it to the required network
- Open the Sensoware dashboard
- Register or activate the device
- Wait for the device status to show as online
Verify Setup
Once installation is complete, confirm that:
- The device appears in your device list
- The status is online
- Live data is visible
- The expected location and name are correct
Next Step
After installation, continue to the configuration guide to review settings and alerts.