Newsletter Form

Subscribe to our newsletter

Submit a Ticket

SA301 12V DC 3 Wire

SA301 wire connection is the basic connection for 12V DC Valve. 

Details of the connections are as follows

sa301 12vdc 3 wire circuit
  • Keep your 12 V 1.5Amps power supply ready or as per the instructions given in the actuator. Because the current rating requirements may differ from actuator to actuators.
  • Connect the 12V +ve to the Red colour wire.
  • Connect the 12V -ve to the Black colour wire. 
  • Connect the Green wire to the 12V +ve whenever the valve needs to be opened. 
  • This supply to the green wire can be given thru PLC, Relay Float switch.
  • As long as you need to open the valve, the green terminal should be connected to +ve 12V DC.
  • Note: Since the valve is stay put on power failure type. Red and black to be connected to positive and negative of 12V DC always.
  • Power consumption during valve close is zero and open is around 20mA. Actual power consumption takes during the movement of valve. 


SA301 Connection Details
Share your love

Still can’t find an answer?

Send us a ticket and we will get back to you.