Newsletter Form

Subscribe to our newsletter

Submit a Ticket

SA502 24V DC 5 Wire

SA502 wire connection is a 24V DC with feedback function.

sa502 24vdc 5 wire with feedback

Details of the connections are as follows

  • Keep your 24 V 1.5Amps power supply ready. (Ampere Rating of the power source will differ based on actuator model)
  • Connect the 24V +ve to the Red colour wire.
  • Connect the 24V -ve to the Black colour wire.
  • Connect the Green wire to the 24V +ve whenever the valve needs to be opened.
  • This supply to the green wire can be given thru PLC, Relay Float switch.
  • As long as you need to open the valve, the green terminal should be connected to +ve 24V DC.
  • Note: Since the valve is stay put on power failure type. Red and black to be connected to positive and negative of 24V DC always. Power consumption during valve close is zero and open is around 20mA. Actual power consumption takes during the movement of valve.
  • Feedback output can be taken from blue for open side and yellow for close side. Feedback voltage is +24V DC

Share your love

Still can’t find an answer?

Send us a ticket and we will get back to you.